Advice / Leaks
9 signs of a hidden water leak in your walls, floors or ceiling
Most leaks are found weeks after they start. These are the early signs, and how leak detection finds the source without guesswork.

The short version
- Unexplained rises in your water bill are often the first clue.
- Stains, bubbling paint, musty smells and warped floors all point to hidden water.
- A simple water meter test tells you if water is escaping when nothing is running.
- Professional leak detection finds the source without ripping out half the room.
Most leaks start small and stay hidden behind walls, under floors or in the ceiling for weeks before anyone notices. By then the damage has usually spread. Spotting the early signs of a hidden water leak can save you a lot of money and disruption. Here's what to look for, and what to do if you find it.
9 signs you might have a hidden leak
- Your water bill has jumpedIf you're on a meter and your use hasn't changed, a sudden rise is one of the most reliable warning signs.
- Stains on walls or ceilingsYellow, brown or grey patches, often spreading slowly, especially under bathrooms.
- Bubbling or peeling paint and wallpaperMoisture behind the surface pushes paint and paper away from the wall.
- A musty, damp smell that won't goEspecially under sinks, behind appliances or in cupboards, even after cleaning.
- Mould appearing in odd placesMould on a wall that isn't usually damp often means water is getting in from behind.
- Warped, lifting or soft flooringLaminate that swells, tiles that loosen or boards that feel spongy can all be signs of water underneath.
- The sound of running waterHissing or dripping when every tap and appliance is off.
- Low water pressureA drop in pressure can mean water is escaping somewhere before it reaches your taps.
- Your boiler keeps losing pressureIf you have to top it up regularly, there may be a leak in the heating pipework.
A quick test you can do yourself
If you have a water meter, turn off every tap and water-using appliance, make sure nobody uses water, and take a reading. Wait an hour or two and read it again. If the numbers have moved, water is escaping somewhere. It won't tell you where, but it does confirm there's a leak worth tracing.
Why hidden leaks get expensive
A slow leak soaks into timber, plaster and insulation for weeks. That can lead to rotting floor joists, collapsing ceilings, mould and damaged electrics. It can also affect your insurance, as many policies don't cover damage from a leak that has been going on for a long time.
How professional leak detection works
Rather than lifting floors and opening walls to look, leak detection uses non-invasive equipment to pinpoint the source:
- Thermal imaging shows temperature differences where water is escaping, especially from heating pipes.
- Moisture mapping measures how wet walls and floors are, to follow the water back to its source.
- Acoustic detection listens for the sound of water escaping under pressure.
- Tracer gas can be used on pipes where other methods can't reach.
Once the leak is found and repaired, any wet areas need drying properly before they are made good, or the damage will come back.
Common questions
How do I know if I have a leak under the floor?
Look for warm or damp patches, lifting flooring, a musty smell or your boiler losing pressure. A water meter test can confirm water is escaping.
Can a hidden leak cause mould?
Yes. Moisture trapped behind walls or under floors is one of the most common causes of mould in homes.
Will my insurance pay for leak detection?
If your policy includes trace and access cover, the cost of finding the leak and making good is often covered. Check your policy wording.
How long does leak detection take?
Most homes can be surveyed in a few hours. Complicated systems or commercial buildings can take longer.



